19mm stainless steel welded mesh is a grid of stainless steel wires joined at their intersections, with a nominal opening of 19 mm. Buyers typically specify it by opening size, wire diameter, stainless steel grade, panel or roll dimensions, and any finishing requirements. The 19 mm opening alone does not define the mesh’s strength, corrosion suitability, or finished size, so these details should be confirmed before ordering. This guide explains how to compare specifications, match the mesh to an application, and prepare a useful supplier inquiry.
You can find more information on our web, so please take a look.
This guide is intended for distributors, fabricators, contractors, and purchasing teams evaluating stainless steel welded mesh for a project or product line. It is useful if a drawing or request mentions a 19 mm opening but does not provide a complete specification. It can also help buyers compare quotations that use different wire diameters, materials, or panel formats. Final selection should be based on the operating environment and the required mechanical performance, not opening size alone.
Welded mesh is made by arranging wires in two directions and welding them where they cross. In a 19 mm mesh specification, “19 mm” generally refers to the nominal clear opening, but buyers should verify whether a supplier is describing the clear space between wires or a center-to-center distance. Those measurements are not interchangeable. A drawing or written specification should state the measurement method.
The opening size describes the grid; wire diameter describes the thickness of each wire. Together, these dimensions affect the open area, rigidity, weight, and suitability for a particular use. Stainless steel grade and surface condition matter too, particularly where moisture, cleaning chemicals, salt, or other corrosive conditions are present.
Common grades considered for welded mesh include 304 and 316 stainless steel, subject to supplier availability and project requirements. Grade selection should reflect the actual environment rather than a general assumption that all stainless steel performs identically. For example, buyers assessing coastal, chemical, or frequently washed environments should describe the exposure to their supplier and confirm whether the proposed grade is suitable. Where compliance or traceability is required, request the relevant material documentation as part of the quotation.
Wire diameter should be stated separately from the 19 mm opening. A thicker wire may provide greater rigidity, but it can also change the mesh’s weight, open area, and cost. Weld quality and dimensional consistency are additional considerations for fabricated parts or installations where panels must align. If the mesh will be cut, bent, framed, or welded into an assembly, explain that processing so the supplier can assess the specification and format.
Mesh may be supplied in panels or rolls depending on the product construction, wire size, and supplier’s production capabilities. Do not assume that a particular width, length, or packaging format is standard for every 19 mm mesh. State the required finished dimensions, quantity, and any cutting or edge requirements in the inquiry. If dimensions are flexible, ask the supplier to identify available options and how they may affect yield and freight.
| Specification item | What to confirm |
|---|---|
| Opening | 19 mm nominal size and whether it refers to clear opening or another measurement convention |
| Wire diameter | Required diameter and any permitted dimensional variation |
| Material | Stainless steel grade and documentation requirements |
| Format | Panel or roll, finished dimensions, edges, and packaging |
| Use conditions | Exposure, loading, cleaning, installation, and fabrication needs |
A 19 mm opening can be considered for partitions, guards, screening, equipment enclosures, and fabricated panels where this grid size meets the design requirement. Whether it is appropriate depends on what the mesh must retain, exclude, protect, or support. The opening does not by itself establish a safe load rating or make the product suitable for a specific safety-critical use. For such applications, obtain engineering review and specify the relevant performance criteria.
You will get efficient and thoughtful service from Shunqiang Wire Mesh.
For indoor partitions or general enclosures, appearance, panel dimensions, edge treatment, and ease of installation may be primary considerations. For wet or corrosive settings, stainless grade and maintenance conditions deserve closer review. For screening, confirm that the opening and wire arrangement match the required separation task, and consider whether the mesh will be exposed to abrasion or impact. Where mesh is incorporated into a finished product, check compatibility with the frame, fasteners, and fabrication process.
Start by describing what the mesh needs to do, rather than requesting “19 mm stainless mesh” alone. Clarify whether it is intended as a barrier, guard, screen, partition, or fabricated component. Note any load, access, visibility, or containment requirements that influence the design. If a drawing exists, share it with the supplier.
Confirm the 19 mm opening measurement convention, wire diameter, finished width and length, and panel or roll format. As an illustrative quotation example—not a standard product specification—a buyer might request a 19 mm nominal clear opening, 1.2 mm wire diameter, and panels measuring 1,000 mm × 2,000 mm. The actual dimensions and wire diameter must be selected for the application and confirmed by the supplier. Also state whether cut edges, framing, or other processing is required.
Identify the expected exposure, including moisture, cleaning agents, salt, and temperature changes where relevant. Ask the supplier to recommend or confirm a grade based on those conditions, and request material records if they form part of your purchasing requirements. Avoid treating “stainless steel” as a complete material specification. The exact grade should appear on the quotation and order documents.
For a repeat order or a close-fit assembly, agree on the dimensional tolerances and inspection method before production. A sample or drawing review can help both parties confirm the opening, wire diameter, and edge details. Request a written specification that records the agreed material, dimensions, quantity, finish, packaging, and inspection requirements. These checks reduce the risk of comparing quotations that do not describe the same product.
Pricing depends on the selected grade, wire diameter, mesh dimensions, order quantity, processing, packaging, and delivery destination. Minimum order quantity and lead time can vary with the requested specification and production schedule, so they should be confirmed in a project-specific quotation. Custom panels or added fabrication may affect both cost and timing. For a more comparable quote, provide the same complete specification to each supplier.
At Shunqiang Wire Mesh, we encourage buyers to send a drawing or a complete specification rather than relying on the opening size alone. Our team can review the requested mesh details, clarify available material and format options, and prepare a quotation based on the project information provided. If a requirement is not yet finalized, identify which dimensions are fixed and which can be discussed. This makes it easier to evaluate practical options without assuming that an unconfirmed specification is suitable.
19mm stainless steel welded mesh can be a suitable option when its opening, wire construction, material, and format match the project’s requirements. To move forward, prepare the intended application, confirm whether 19 mm means clear opening, specify wire diameter and stainless grade, and provide the required dimensions and quantity. Ask suppliers to record tolerances, documentation, delivery terms, MOQ, and lead time in their quotations. Send these details to Shunqiang Wire Mesh to discuss a project-specific specification and request a B2B quotation.
Are you interested in learning more about 19mm stainless steel welded mesh? Contact us today to secure an expert consultation!