Tg Oil Seal Selection Guide: Sizes, Applications, and Specification Checks
To select a Tg oil seal, first confirm what “Tg” means in the supplier’s product description or drawing, then match the seal’s dimensions, material, lip design, and operating conditions to your equipment. The designation is not enough on its own to establish a universal size or performance standard, so request a drawing or specification sheet when the exact construction is unclear. Before placing an inquiry, gather the shaft diameter, housing bore, installation width, fluid, temperature, shaft speed, and any pressure or contamination requirements. This information helps a supplier assess fit and identify details that need confirmation.
You can find more information on our web, so please take a look.
Who This Guide Is For
This guide is for procurement teams, maintenance engineers, and equipment manufacturers comparing Tg oil seals for replacement or new applications. It is especially useful when a part number is incomplete, a seal has been removed from service, or the application conditions have changed. The checks below can help you prepare a clearer request for quotation, but the machine drawing and seal manufacturer’s confirmed specifications should remain the basis for final selection.
What a Tg Oil Seal Does
An oil seal, also called a radial shaft seal, is installed between a rotating shaft and a housing to help retain lubricant and limit the entry of dust or other contaminants. Its sealing lip contacts the shaft, while the seal body fits into the housing bore. Depending on its design, a seal may include a secondary dust lip, a metal case, a spring, or other features. Confirm the construction associated with “Tg” with the supplier rather than assuming the letters describe the same design across all catalogs.
Common Applications
Oil seals are used in equipment such as gearboxes, pumps, motors, agricultural machinery, and industrial drives. The right choice depends on the actual combination of shaft rotation, lubricant, temperature, contamination, and installation space. A seal that fits the bore and shaft can still be unsuitable if its elastomer is incompatible with the fluid or its lip design does not suit the operating environment.
Sizes, Materials, and Design Options
Confirm the Three Main Dimensions
Most radial oil seal dimensions are specified as shaft diameter × housing bore diameter × seal width, commonly written as d × D × b. For example, 25 × 40 × 7 mm is an illustrative size format, not a recommendation for a particular machine. Check the equipment drawing or measure the shaft, bore, and available axial space; do not identify a replacement by outside appearance alone. If measurements are taken from a worn seal, account for distortion, wear, and damage before using them to define the required size.
Choose Material for the Fluid and Temperature
Common elastomer choices include NBR and FKM, but the correct grade depends on the fluid, temperature, and operating conditions. As a general reference only, some NBR compounds are specified around -30°C to +100°C, while some FKM compounds are specified around -20°C to +200°C. These are not universal limits: formulations differ, and continuous service conditions may affect suitability. Ask the supplier to confirm the specific compound’s compatibility and allowable operating range for your application.
Other material options may be available for particular fluids or environments, but availability and performance depend on the seal design and compound. Also confirm whether the seal has a single or additional dust lip, a metal case, or a spring where relevant. These features can influence installation, lubricant retention, and resistance to external contamination, so specify them from the drawing or application requirement.
With competitive price and timely delivery, TEBIETE sincerely hope to be your supplier and partner.
A Practical Selection Framework
- Identify the exact product. Provide the Tg designation, existing part number, manufacturer details if known, and photographs or a drawing. Ask the supplier to confirm the meaning of the designation and the seal construction.
- Verify dimensions. Supply shaft diameter, housing bore, and seal width in millimeters, along with tolerances if available. Confirm the units and whether the dimensions refer to the shaft, housing, or seal itself.
- Describe operating conditions. State the fluid or lubricant, operating temperature range in °C, shaft speed in rpm, and whether the shaft rotates continuously or intermittently. Include pressure, direction of rotation, and start-stop conditions where applicable.
- Explain the environment. Note exposure to dust, water, washdown, chemicals, abrasive particles, or outdoor conditions. Describe any secondary protection already provided by the equipment.
- Check installation constraints. Confirm the available space, shaft condition, assembly method, and whether the seal will be replaced in the field or installed during production. Ask whether the supplier recommends any additional handling or installation checks.
- Request written confirmation. Before ordering, compare the quotation or drawing against the required size, material, design, and operating conditions. Resolve any differences in part number, material code, or tolerance in writing.
Key Specification Checks Before Ordering
A useful inquiry includes more than a size. Provide the original part number and equipment model if available, the three dimensions, material requirement or fluid, temperature range, shaft speed, and expected order quantity. Attach a drawing or clear photographs with a scale reference when the seal’s profile is unusual. If any operating value is unknown, label it as unknown rather than estimating it; the supplier can then identify what needs clarification.
Pay particular attention to shaft condition and installation. Surface damage, burrs, misalignment, or an unsuitable shaft finish can affect sealing, even when the seal dimensions are correct. Do not treat a replacement seal as a way to compensate for a worn shaft or damaged housing. Ask the equipment maker or seal supplier to assess the installation details when they are uncertain.
Pricing, MOQ, and Lead Time
Price and lead time can depend on size, material, design, order quantity, tooling needs, and whether the item is a standard or non-standard specification. Minimum order quantities are supplier- and product-specific, so request the applicable MOQ rather than assuming one. For planning, state both the immediate requirement and expected repeat demand, and ask whether samples, drawings, or a pre-production confirmation are available for the proposed item.
When comparing quotations, check that each supplier is quoting the same dimensions, material, construction, and quantity. A lower price is not a useful comparison if the quoted material or lip design differs from the requested specification. Ask for any exclusions or substitutions to be clearly identified before approving the order.
Supplier Evaluation Checklist
- Can the supplier confirm what the Tg designation refers to and provide a drawing or specification for the quoted seal?
- Does the quotation state the dimensions, material, design features, and relevant tolerances?
- Can the supplier review the stated fluid, temperature, speed, and environmental conditions?
- Are MOQ, sample availability, lead time, packaging, and shipping terms clear?
- Can the supplier explain how any proposed alternative differs from the requested specification?
TEBIETE works with B2B buyers on oil seal sourcing and specification inquiries. Share the part number, drawing, dimensions, application details, and target quantity so our team can review the request and clarify available options. Any proposed product or material should be checked against your equipment requirements before purchase.
Summary and Next Steps
Selecting a Tg oil seal starts with confirming the designation, then matching its dimensions, material, design, and operating conditions to the equipment. The three essential size values are shaft diameter, housing bore, and seal width, but fluid compatibility, temperature, speed, contamination, and installation also matter. Material temperature ranges are compound-dependent, so treat general references as a starting point and obtain confirmation for the specific grade.
For a practical next step, prepare the part number or drawing, dimensions in millimeters, operating conditions, and quantity before requesting a quotation. Ask the supplier to confirm the construction and written specification, and resolve any differences before ordering. Contact TEBIETE with these details to begin a focused B2B inquiry for your Tg oil seal requirement.