Wiegand Barcode Scanner & NFC reader And Access Control Solution

Introduction:

Most of the barcode scanners do not have Wiegand output. In addition, much often when we configure a barcode scanner with an access control panel,  we would meet these problems: 1. the output data are wrong–different from the original bar code content. 2. no output. These problems are usually because the data format does not match the requirements of the control panel. For example data length, ASCII, hex, or direct output data, with or without prefix/ suffix…

Now we can use the RTWG01 Wiegand converter to achieve Wiegand output and solve the above problems. Via this RTWG01, we can easily customize the output data transferred to the access controller board. Data length, ASCII, hex, or direct output data, with or without prefix/ suffix… For example: if a barcode includes information: “William zhang, 2345666677, ****224455555*…” we can pick up number “34566667” or “23456666” or “5666677”…